For use as a QLab Remote, MIDI Go Button, Ableton Remote, SCS Remote, SFX Remote, or MIDI Remote in supported applications, with dual USB outputs and a footswitch GO jack.
The Q-Widget-PRO is a simple and dependable show-control remote for QLab, Ableton, Show Cue Systems’ SCS, Stage Research’s SFX, and any other Mac or PC application with MIDI support.
Built with the highest quality components, the Q-Widget-PRO is designed to work as hard as you do.
- Dual USB output for backup systems
- Footswitch jack as an alternate “GO” input
- Broadcast-grade switches and encoder
- Zero-latency, double-go protected firmware
Available with MIDI or our Legacy QLab Mode
The Q-Widget comes preinstalled with your choice of firmware. We recommend the MIDI version in most cases – the MIDI version requires no driver and works natively on Mac OS X and PC Windows. The Legacy QLab Mode is a specific mode intended for users of Figure53’s QLab 3 without a MIDI license – this mode requires a driver.
Why not Wireless, or an iPad/iPhone App?
Don’t take the chance that your Wifi signal is lost at the critical moment you need to fire a cue. Ethernet packets by design can go missing and have to be re-sent, adding latency to your cues. When cue playback for a show is mission-critical, a wired remote is the ONLY reliable way to go.
What’s in the box?
1 Q-Widget-PRO Remote
2 Premium 15′ USB 2.0 Cables
1 Instruction Card / Manual
Using the Q-Widget in MIDI Mode
As a MIDI remote, the Q-Widget sends 10 separate commands to any MIDI application using only 3 buttons and a knob.
No driver is required on the host computer. Additional setup is necessary in your application. MIDI is transmitted on Channel 16. The Q-Widget sends Note-On messages at velocity 127 when pressed, and Note-On messages at velocity 0 when released.
- GO button sends on Note 1
- PAUSE button sends on Note 3
- STOP button sends on Note 2
- LEFT knob sends on Note 5
- RIGHT knob sends on Note 6
- PUSH knob sends on Note 4
- STOP + PAUSE buttons send on Note 7
- PAUSE + GO buttons send on Note 8
- STOP + PAUSE + GO buttons send on Note 9
- STOP + GO buttons send on Note 10
Using the Q-Widget remote in QLab Mode
As a QLab remote, the Q-Widget sends 12 separate commands to QLab using only 3 buttons and a knob. The firmware in QLab Mode is intuitive and context aware, multiplying the available functions without the need for button combinations or additional buttons.
Using QLab Mode with the Q-Widget does require a driver be installed on the host Mac. No additional setup is necessary in QLab. Simply install the QLab Mode driver on the host Mac, and the remote will communicate with QLab.
Compatible with all versions of Figure53’s QLab.
- GO a cue
- GO the list
- RESUME a paused cue
- RESUME a paused list
- PAUSE a cue
- PAUSE the list
- STOP a cue
- STOP the list
- RESET the list
- NEXT cue
- PREVIOUS cue
- LOAD cue
Only logged in customers who have purchased this product may leave a review.